Adjusting the audio delay
Leave the Rapidmooc application.
Open the Windows menu at the bottom left of the screen and launch the ATEM Software Control application.
In the ATEM Software Control select the Audio menu at the bottom of the screen.
In the audio panel, click on the audio delay box below Mic 1 and Mic 2
In the popup, adjust the delay to the desired number of frames. It should be around 6 or 7 frames
Close the ATEM Software Control application.
Launch the Rapidmooc application again.
It must be noted that the ATEM Software Control and the Rapidmooc application must not be running at the same time when changing the audio delay.